3D Spirit Electric 39" ARF, all wood 3D plane.
 
Spec:
Wingspan: 39 in (1000mm)                      
Wing Area: 341 sq. in
Overall Fuselage Length: 31 in (790mm).         
ARF weight : 8.6 oz
Radio required: 4ch. 4 servos
ESC: 18-20A
PVC cowl and carbon fiber landing gear included

Contains 3D Spirit ARF, A20-28M brushless outrunner and 20 amp controller.

Spec:
Wingspan: 39 in (1000mm)                      
Wing Area: 341 sq. in
Overall Fuselage Length: 31 in (790mm).         
ARF weight : 8.6 oz
Radio required: 4ch. 4 servos
ESC: 18-20A
PVC cowl and carbon fiber landing gear included

BUDGET RC Lil Moe Foam Airplane Kit
Ok, so a 29" wingspan might put you in the “little foamie” category, but that’s where it ends. LiL Moe is huge on performance. Its generous wing area and phat fuselage makes for a stable easy to fly performer. Slow flight is a breeze and wild flight is a blast. Knife edge till the cows come home with that wide fuse and centered wing. Remember what your Momma said ” It doesn’t matter how small you are, it’s how well you perform!” Whether you’re at lunch, at the field or in the dome, Lil Moe is ready.
Weight RTF without Battery 4.2 ozWingspan 29?
This kit features
Interlocking Depron Parts
Wide Fuselage (Loves Knife Edge)
Large Rudder (Turns on a dime)
3D Capable
Small enough to go Anywhere, Anytime
Kevlar string to reinforce the wings
All the Carbon you need
Wheels
Control Linkage
Lil Moe will show himself off with great rolls, loops and rolling circles as well as a great Decal Package.

Here’s Where ‘The Rubber Meets the Air’ Budget RCs EPP!! JETS Have the Speed and the Durability.
If you've wanted to own a jet with great performance and durability, the Budget RC RF-18 is for you. This jet is sure to turn heads at the field. Many RC'ers have never seen an electric EPP model go this fast. Show them What It's All About. You'll be thrilled with the smooth, groovy feel and the crisp response our RF-18 will deliver.
Budget RC's EPP JETS are unsurpassed in performance for a durable airframe. These JETS are flexible enough for the hard landings, bumps, and bruises that send most foam jets back to the hangar. This material is extremely tough and very easy to fix at the field or dome. Budget RC's JETS can be used with several power systems. So if you’re flying in a park, use a lightweight power package. If you are at the field choose a high speed package. Either way these birds will fill you with the same excitement of your very first flight.
Features
Wingspan 24.5"
Length 35.0"
Weight RTF w/o Lipo 10.0 oz
Kit only (requires painting).
Lightweight Flexible EPP Foam Airframe Bounces Back from Mishaps with the Ground. Less Repair, More Flying!
Extremely Easy to Repair at the Field using Standard CA. Repairs are Fast, Simple and Invisible.
 Very Easy to Assemble. All Parts Lock in Place. Build it Quick, Go Fly!
Kits Contain All Control Linkage. No Need to Run to the Store.
Lots of Carbon. Engineered to be Flexible, yet stiff, in Flight.
All Control Surfaces come Pre-Beveled. Spend your time FLYING not BUILDING!

Here’s Where ‘The Rubber Meets the Air’ Budget RCs EPP!! JETS Have the Speed and the Durability.
If you've wanted to own a jet with great performance and durability, the Budget RC SR-71 is for you. This jet is sure to turn heads at the field. Many RC'ers have never seen an electric EPP model go this fast. Show them What It's All About. You'll be thrilled with the smooth, groovy feel and the crisp response our SR-71 will deliver.
Budget RC's EPP JETS are unsurpassed in performance for a durable airframe. These JETS are flexible enough for the hard landings, bumps, and bruises that send most foam jets back to the hangar. This material is extremely tough and very easy to fix at the field or dome. Budget RC's JETS can be used with several power systems. So if you’re flying in a park, use a lightweight power package. If you are at the field choose a high speed package. Either way these birds will fill you with the same excitement of your very first flight.
Features
Wingspan 22"
Length 43.0"
Weight RTF w/o Lipo 11.0 oz
Kit only (requires painting).
Lightweight Flexible EPP Foam Airframe Bounces Back from Mishaps with the Ground. Less Repair, More Flying!
Extremely Easy to Repair at the Field using Standard CA. Repairs are Fast, Simple and Invisible.
Very Easy to Assemble. All Parts Lock in Place. Build it Quick, Go Fly!
Kits Contain All Control Linkage. No Need to Run to the Store.
Lots of Carbon. Engineered to be Flexible, yet stiff, in Flight.
All Control Surfaces come Pre-Beveled. Spend your time FLYING not BUILDING!

ULD (EPP) Precision Aerobatic Trainer
Precision Aerobatic Trainer “ULD”. It won’t get beat up in the schoolyard
Budget RC incorporated EPP and Depron to create an airplane that can flex on the ground and be stiff in the air. Using low cost electronics you will learn to Roll, Loop, Hover, Spin, Roll in Circles and basically really impress all that watch. Use it to learn new maneuvers to prevent busting up that larger scale model. Sport flyers will love the easy and stable flight characteristics, while really improving their flying skills. If you’ve been wanting to enhance your rudder skills, ULD is perfect.
The Budget RC ULD is an aerobatic trainer specifically designed to handle all the bumps and bruises associated with learning to fly precision maneuvers. It's foamie construction has been specifically designed to fly precision while being flexible enough to handle mishaps with the ground. Months of testing have developed the lightest and strongest airframe of EPP and Depron. Sport flyers will find the ULD a joy to fly and will definitely improve their skill using a rudder.
ULD is a neutral airplane and benefits by using the rudder which can easily be programed in your radio, if you choose. ULD's rolls are straight and true, and the knife edge flight is unbelievable. It is so well balanced it will do hands off knife edge. ULD WILL improve your Roll, Harrier, Knife edge, and Hover Skills (again and again) without destroying the airplane.
The ULD is also perfect for sport flyers looking to bore holes and tie knots in the sky. It has been designed to use a low cost brushless motor, while maintaining blistering performance. This kit comes packed full of carbon and includes all control horns and linkage. All parts are laser cut to perfection. You'll agree, this is the best value in 3D aerobatic RC.

Arrow II F3p Precision Aerobatics
Are You Serious Enough for an ARROW II? Out of the Box F3P Competition Ready
If you’re serious about precision aerobatics the Arrow makes it happen. This Depron frame is only 5 ounces or less out of the box. A series of Kevlar lines makes the frame incredibly strong while construction is extremely easy. This plane is extremely easy to fly. It is so well balanced it will do hands off knife edge “really!“. Much has been written about the Arrow on the internet. When it comes to foamies, this is in a league all it’s own. Designed By Robert Youens.
For the intermediate sport flier, the Arrow is incredible easy to fly. The Arrow does very well in small gym areas because it flies so slow. It maintains flight easily at 1/3 throttle while flying at a walking pace. It is also easy to see with a 27.5in span. Fly the amazing Arrow In a gym, dome or at the park on a calm day.
Click here to get the Arrow in Real Flight 3.5
Specifications
Weight RTF 4.9 to 5.9oz.
27.5 in. Span
34.15 in.Length
Suggested 15 to 19 gm Brushless Motor and a 300 to 500 mAh 7.4V lipo

The 20" NutBall…..It’s what you get when you combine a Pizza Box Flyer with a Smart Dart, Get the best of both worlds.
It’s round, and it flies like crazy; hence the name. It can be set up for flying from mild to wild. It’s an easy quick build, so any repairs are a breeze. There’s no nose or tail to break off and the wing can’t fold. As a trainer it can fly slower than slow, super stable and no bad habits. Turn up the volume for advanced flying or silly fun. It flies almost as if it has ailerons……rolls, loops, snaps and spins both ways, it flies inverted, the prop hangs like a full blown 3D machine, and it has no pitch problems at high speed.
Here's What You Get: 1. 9 mm EPP Laser Cut Parts, Slot and Tab Construction 2. Wheels 3. Wire Landing Gear 4. Control Rods 5. Control Horns 6. Wood Motor Mount 7. All the Carbon you Need
Designed by Frank Weaver, the Nutball is an outstanding trainer that is exceptionally easy to Fly. But if you're a Nut, just turn up the throttle and the controls, and your heart rate is Guaranteed to Rise. Hovering and Harriers are a breeze.

Lightweight Flexible EPP Foam Airframe 
Bounces Back from Mishaps with the Ground. 
Less Repair, More Flying!
Extremely Easy to Repair at the Field using Standard CA. 
Repairs are Fast, Simple and Invisible.
Very Easy to Assemble. All Parts Lock in Place. 
Build it Quick, Go Fly!
Kits Contain All Control Linkage. 
No Need to Run to the Store.
Lots of Carbon. Engineered to be Flexible, yet stiff, in Flight.
All Control Surfaces come Pre-Beveled. 
Spend your time FLYING not BUILDING!

Now you can fly sport or combat right in your backyard and fullfill your need for performance. Indoor or outdoor, these warbirds allow you to stretch your flying skills to the limits. If you're looking for impact forgiveness, Budget RC's WWII series bounces back from the abuse. When it comes to value you will agree these kits are for you. Kits include all carbon, control linkages and laser cut parts that fit together like a dream.
About Budget RC's WWII series
These foamies fly all year long at the field, park or in the dome. Generous wing area enhances slow flight. Sport flyers will love the crisp, stable response these birds were designed for. Combat lovers will enjoy the durability and the snappy way they pull a 10ft streamer. These battle machines sport an average 28? wingspan and a 5oz. weight and come unpainted. They all vary slightly and maintain their original personalities. The Mustang is quick, nimble and predictable. She delivers all the performance you would expect from the king of the skies.
Features
Weight without battery is 4.5 to 5.1 ounces.
Designed for a 15 to 20 gram motor / 7.4V - 500mAh or less Lipo.
Extremly easy to assemble.
Very Well Designed.
Use a 10ft -2 color streamer. Simple Rules.
Lots of detailed Information.Click Here.
All Parts Laser Cut, Carbon and Control Linkage Included. Listen to the sounds of the real fighters.

Requires:
17 to 24 Gram Brushless Motor
6 A. ESC
2 ea 3 to 5 gram servos
3oo to 500 2cell Lipo

Introducing the Zip V by Budget RC. The Zip V is like a Nutball on Steroids. The Zip V is constructed from Depron to give crisp response at high speeds. With the throttle up it’s a wild and crazy ride, and yes that’s a huge functional rudder on the back. It’s slow speed performance is outstanding ( a real Floater). Perfect for any experienced pilot. Kit comes unpainted with optional Decals.
Features
Wingspan 32.5?
Length w/o Motor 25?
6.9 oz RTF without Battery
Elevons and Rudder Control
Control Linkage Included
Wheels Included
Picture shows optional Decal Kit.

Cheap Trick Giant 3D Park Flyer
Are you tired of the same old thing?
Cheap Trick breaks the boredom with it’s huge 44" wingspan and extremely smooth aerobatics. Are you a giant scale fan? If so, you’ll love the way Cheap Trick flies like a giant scale gasser. The Reason is because it has the stiffest Fuse and Wing in its Class for a giant park flyer. Cheap Trick was also designed to give blistering performance on inexpensive electronics.
Features
Control Rods and Linkage are Included
High Quality Wheels are Included
Super Strong Construction
Very Fast and Easy to Assemble
Highly Detailed Instructions with Videos
Perfect for Learning 3D
Very Easy to Fly (Flies Like a Giant Scale)
Uses Inexpensive Electronic Gear
Cheap Trick has been designed to have a very rigid Fuselage and Wing, No FLEXING or TWISTING. We leave that to the competition. Cheap Trick was Designed to Fit in a Small Vehicle, so if you are driving a Focus or a PT Cruiser, you can slide Cheap Trick right in. Cheap Trick is by far The Lightest Giant Park Flyer in its Class.
Required
Tower Pro 2409-12T
25 to 30 A. ESC
4 ea. Tower Pro Servos
1000 to 1600mAh 2cell Lipo

Take Pride in Building it Yourself
BRC’s Cessna 185 is a full fuselage kit. It is very easy to assemble, very easy to fly and is extremely durable. Assembly is easy with a CNC cut center block and laser cut parts that fit perfectly. Flying is a joy with Aileron, Elevator and Rudder control. Separate servos for each aileron can be programmed for flaps as well. The center foam block adds an amazing amount of strength to the fuselage and the rubberband mounted wings keep crash damage to a minimum.
41 Inch Wingspan
Wheels and control linkages are included.
With the Budget RC 185 it's easy.
Because of the construction technique:
The amount of parts are kept to a minimum
Much stronger than an average foam ARF
Uses a Center Foam Block with Depron Sides
Here's What you Get:
Foam Center Block, CNC Hot Wire Cut
Laser Cut Depron Parts
Laser Cut Lightweight Wheels
Carbon Control Rods
Control Horns and Linkage
Carbon Wing Spars

Identical airframe to the standard version but with a new fan and motor to explore 4-cell performance.

The sleek, precise, EPS foam moldings and high-quality hardware are exactly as you would expect from Phase 3 and assembly is both quick and enjoyable. Actually, a couple of hours will have it done.

The sleek delta-wing design and careful use of the fuselage allows the Squall to explore its entire speed envelope with control and stability. Even the surface finish has been optimized to enhance performance by keeping it as smooth as possible and small fairings are provided for each servo. The powerful elevons can roll the Squall at an amazing rate (aka a blurr!) and the ability to loop in its own length has to be seen to be believed. The added dimension of a rudder on the Squall opens up the possibility of some radical manoeuvres in yaw too.

With 4-cell power, vertical is almost unlimited and speed is mind- blowing. You will need to be quick-witted with this one!

The completely new fan unit, with a 3-blade 64mm impeller, 3400kv outrunner motor and 45A ESC deliver thrust at an amazing rate and power the Squall through some of the widest loops and wing-overs you can imagine. It really is that good! It is recommended that you use a 2500mAh 30C battery (Impulse or Intellect) as a minimum, so that battery life is maintained when you're having that much fun. You might need more than one pack though, as the Squall is addictive!

For those that can never have enough performance and really want to challenge their pilot skills, there is an optional Vectored Thrust unit. With power substantially over 1:1 you can be sure of enough thrust to do just about anything. Jet hovering anyone???